ACL Race Series Connecting Rod Bushes - Subaru EJ15 and EJ16 - STD - 4B8320HX-STD

ACL
Reference: ACL-4B8320HX-STD
Supplier Ref.: 4B8320HX-STD

Price: CHF 49.20 Tax included
Available to order Within 20 days on average.
Unavailable in store (Promasens)
Earn 49 loyalty points

ACL Race Series 4B8320HX-STD connecting rod bushes with a trimetal construction are designed for Subaru EJ15 and EJ16 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B8320HX-STD corresponds to the standard (STD) size.

ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.


Technical Specifications

  • Type: connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer Part Number: 4B8320HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: EJ15 and EJ16
  • Manufacturers: Subaru
  • Rod journal diameter (nominal dimension): 47.984 to 48 mm
  • Connecting rod top end bore: 51 to 51.02 mm
  • Maximum thickness at the top: 1.485 mm
  • Maximum width: 15.63 mm

Engine configurations compatible with ACL 4B8320HX-STD bearings

The engine models listed for this set include: EJ20 | EJ205/207 | EJ22 | EJ25 DOHC | EJ25 SOHC | EJ255 | EJ257 | EJ15 | EJ16 | EJ18 | EJ25 | EJ20T | EJ20TT | EJ22T | EJ25T.

Mounting Recommendations

Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.

ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.

  • Thickness in mm
    1,49
  • Width in mm
    15,63
  • Engine code
    EJ20 - 2.0L 16V
    EJ22 - 2.2L 16V
    EJ25 DOHC - 2.5L 16V
    EJ25 SOHC - 2.5L 16V
    EJ205/207 - 2.0L 16V
    EJ255 - 2.5L 16V
    EJ257 - 2.5L 16V
  • Make (Engine)
    Subaru
  • Rod Journal Diameter in mm
    47,98
    48,00
  • Max. connecting rod bore in mm
    51,02
  • Min. connecting rod bore in mm
    51,00

16 other products in the same category: