ACL Race Series Connecting Rod Bushes - Toyota 1JZGE, 1JZGTE, and 2JZGE - STD - 6B8100HX-STD

ACL
Reference: ACL-6B8100HX-STD
Supplier Ref.: 6B8100HX-STD

Price: CHF 94.00 Tax included
Supplier stock Shipped between 2026-11-27 and 2026-12-02 from our warehouse
Unavailable in store (Promasens)
Earn 94 loyalty points

ACL Race Series 6B8100HX-STD connecting rod bushes with a trimetal construction are designed for Toyota 1JZGE, 1JZGTE, and 2JZGE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 6B8100HX-STD corresponds to the standard size (STD).

Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction ply. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 6B8100HX-STD
  • Specification: standard specification (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: 1JZGE, 1JZGTE, and 2JZGE
  • Manufacturers: Toyota
  • Rod journal diameter (nominal dimension): 51.981 to 52 mm
  • Connecting rod top end bore: 55.024 to 55.042 mm
  • Maximum thickness at the top: 1.493 mm
  • Maximum width: 19.3 mm

Engine models compatible with ACL 6B8100HX-STD bearings

The engine models listed for this set include: 1JZ | 2JZ | 1JZGE | 1JZGTE | 2JZGE | 2JZGTE.

Mounting Recommendations

Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.

ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.

  • Thickness in mm
    1,49
  • Width in mm
    19,30
  • Engine code
    1JZ - 2.5L 24V
    2JZ - 3.0L 24V
  • Make (Engine)
    Toyota
  • Rod Journal Diameter in mm
    51,98
    52,00
  • Max. connecting rod bore in mm
    55,04
  • Min. connecting rod bore in mm
    55,02

16 other products in the same category: