ACL Race Series Connecting Rod Bushes - Honda and Acura K20A3 - STD - 4B1906HX-STD

ACL
Reference: ACL-4B1906HX-STD
Supplier Ref.: 4B1906HX-STD

Price: CHF 46.30 Tax included
In stock Shipped on 2026-11-20 from our warehouse
Unavailable in store (Promasens)
Earn 46 loyalty points

The ACL Race Series 4B1906HX-STD trimetal connecting rod bushes are designed for Honda and Acura K20A3 engines. These half-bushes help guide the connecting rod top end and form the oil film essential for the bearing’s operation. Part number 4B1906HX-STD corresponds to the standard (STD) size.

The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer Part Number: 4B1906HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: K20A3
  • Manufacturers: Honda | Acura
  • Rod journal diameter (nominal dimension): 44.976 to 45 mm
  • Connecting rod top end bore: 48 to 48.024 mm
  • Maximum thickness at the top: 1.489 mm
  • Maximum width: 15.5 mm

Engine models compatible with ACL 4B1906HX-STD bearings

The engine models listed for this set include: H23 | K20A3 | F23A | F23Z.

Mounting Recommendations

Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Cankshaft bearing oiling depends on the resulting clearance.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and control of operating clearances.

  • Thickness in mm
    1,49
  • Width in mm
    15,50
  • Engine code
    H23 - 2.3L 16V
  • Make (Engine)
    Acura
    Honda
  • Rod Journal Diameter in mm
    44,98
    45,00
  • Max. connecting rod bore in mm
    48,02
  • Min. connecting rod bore in mm
    48,00

16 other products in the same category: