ACL Race Series Connecting Rod Bushes - Mitsubishi 4G64, 4G63, and 4G63T - STD - 4B1185HX-STD
ACL Race Series 4B1185HX-STD connecting rod bushes with a trimetal construction are designed for Mitsubishi 4G64, 4G63, and 4G63T engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B1185HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction ply. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B1185HX-STD
- Specification: standard specification (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: 4G64, 4G63, and 4G63T
- Manufacturers: Mitsubishi
- Rod journal diameter (nominal dimension): 44.981 to 44.996 mm
- Connecting rod top end bore: 47.998 to 48.019 mm
- Maximum thickness at the top: 1.475 mm
- Maximum width: 21.1 mm
Engine models compatible with ACL 4B1185HX-STD bearings
The engine models listed for this set include: 4G63 7 | 4G64 | 4G63 | 4G63T.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm1,48
-
Width in mm21,10
-
Engine code4G63 7 - 2.0L 16V
4G64 - 2.4L 16V -
Make (Engine)Mitsubishi
-
Rod Journal Diameter in mm44,98
45,00 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00