ACL Race Series Connecting Rod Bushes - Toyota 3SGE and 3SGTE - STD - 4B8366HX-STD

ACL
Reference: ACL-4B8366HX-STD
Supplier Ref.: 4B8366HX-STD

Price: CHF 66.80 Tax included
In stock Shipped on 2026-11-20 from our warehouse
Unavailable in store (Promasens)
Earn 66 loyalty points

The ACL Race Series 4B8366HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Toyota's 3SGE and 3SGTE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B8366HX-STD corresponds to the standard size (STD).

Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats experience deformation during operation.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.


Technical Specifications

  • Type: Connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B8366HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: 3SGE and 3SGTE
  • Manufacturers: Toyota
  • Rod journal diameter (nominal dimension): 47.985 to 48 mm
  • Connecting rod top end bore: 51.004 to 51.024 mm
  • Maximum thickness at the top: 1.475 mm
  • Maximum width: 21.3 mm

Engine models compatible with ACL 4B8366HX-STD bearings

The engine models listed for this set include: 3S | 3SGE | 3SGTE.

Mounting Recommendations

Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.

ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.

  • Thickness in mm
    1,48
  • Width in mm
    21,30
  • Engine code
    3S - 2.0L 16V
  • Make (Engine)
    Toyota
  • Rod Journal Diameter in mm
    47,99
    48,00
  • Max. connecting rod bore in mm
    51,02
  • Min. connecting rod bore in mm
    51,00

16 other products in the same category: