ACL Race Series Connecting Rod Bushes - Nissan VK45, VK50, and VK56 - STD - 8B2990HX-STD

ACL
Reference: ACL-8B2990HX-STD
Supplier Ref.: 8B2990HX-STD

Price: CHF 237.00 Tax included
Available to order Within 20 days on average.
Unavailable in store (Promasens)
Earn 237 loyalty points (that is CHF 5.00 in vouchers)

ACL Race Series 8B2990HX-STD connecting rod bushes with a trimetal construction are designed for Nissan VK45, VK50, and VK56 engines. They guide the connecting rod top ends over the crankpins and operate using an oil film that separates the moving surfaces. Part number 8B2990HX-STD corresponds to the standard size (STD).

The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer Part Number: 8B2990HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: VK45, VK50, and VK56
  • Manufacturers: Nissan
  • Rod journal diameter (nominal dimension): 53.962 to 53.974 mm
  • Connecting rod top end bore: 57 to 57.013 mm
  • Maximum thickness at the top: 1.495 mm
  • Maximum width: 18.3 mm

Engine models compatible with ACL 8B2990HX-STD bearings

The engine models listed for this set include: VK45 | VK50 | VK56.

Mounting Recommendations

Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,50
  • Width in mm
    18,30
  • Make (Engine)
    Nissan
  • Rod Journal Diameter in mm
    53,96
    53,97
  • Max. connecting rod bore in mm
    57,01
  • Min. connecting rod bore in mm
    57,00

16 other products in the same category: