ACL Race Series Connecting Rod Bushes - Ford BDA, BDB, and BDC - 0.020 inches (0.508 mm) - 4B1060H-020
ACL Race Series 4B1060H-020 trimetal connecting rod bushes are designed for Ford BDA, BDB, and BDC engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B1060H-020 corresponds to a dimension of 0.020 inches (0.508 mm).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats deform during operation.
This 0.020-inch (0.508 mm) size option allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements, not solely on the engine’s tuning level.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B1060H-020
- Thickness: 0.020 inches (0.508 mm)
- Version: H
- Main engines: BDA, BDB, and BDC
- Manufacturers: Ford
Engine types compatible with ACL 4B1060H-020 bearings
The engine models listed for this set include: BDA | BDB | BDC | BDD.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm2,09
-
Width in mm19,17
-
Make (Engine)Ford
-
Rod Journal Diameter in mm48,69
48,71 -
Max. connecting rod bore in mm52,94
-
Min. connecting rod bore in mm52,93