ACL Race Series Connecting Rod Bushes - Porsche MA1.71 - STD - 6B2484H-STD
ACL Race Series 6B2484H-STD connecting rod bushes with a trimetal structure are designed for Porsche MA1.71 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. The part number 6B2484H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with an interposed nickel barrier. This design ensures mechanical strength and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the prescribed torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2484H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: MA1.71
- Manufacturers: Porsche
- Rod journal diameter (nominal dimension): 52.971 to 52.99 mm
- Connecting rod top end bore: 56 to 56.013 mm
- Maximum thickness at the top: 1.495 mm
- Maximum width: 15.75 mm
Engine configurations compatible with ACL 6B2484H-STD bearings
The engine models listed for this set include: MA1.71.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm15,75
-
Engine codeMA1.71 - 3.8L 24V
-
Make (Engine)Porsche
-
Rod Journal Diameter in mm52,97
52,99 -
Max. connecting rod bore in mm56,01
-
Min. connecting rod bore in mm56,00