ACL Race Series Connecting Rod Bushes - BMW and Toyota B58B30 and S58B30 - 0.025 mm - 6B1510H-.025
ACL Race Series 6B1510H-.025 connecting rod bushes with a trimetal construction are designed for BMW and Toyota B58B30 and S58B30 engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 6B1510H-.025 corresponds to a thickness of 0.025 mm.
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface trim. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
This 0.025 mm variant allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B1510H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: B58B30 and S58B30
- Manufacturers: BMW | Toyota
Engine models compatible with ACL 6B1510H-.025 bearings
The engine models listed for this set include: B58B30 | S58B30.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,81
-
Width in mm19,55
-
Make (Engine)BMW
Toyota -
Rod Journal Diameter in mm49,95
49,97 -
Max. connecting rod bore in mm53,62
-
Min. connecting rod bore in mm53,60