ACL Race Series Connecting Rod Bushes - Alfa Romeo - STD - 6B2270HX-STD
The ACL Race Series 6B2270HX-STD connecting rod bushes, featuring a trimetal construction, are designed for engines compatible with this family of Alfa Romeo bearings. They guide the connecting rod top ends over the crankpins and operate using an oil film that separates the moving surfaces. Part number 6B2270HX-STD corresponds to the standard size (STD).
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction ply, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 6B2270HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Manufacturers: Alfa Romeo
- Rod journal diameter (nominal dimension): 55.992 to 56.008 mm
- Connecting rod top end bore: 59.62 to 59.636 mm
- Maximum thickness at the top: 1.785 mm
- Maximum width: 18.55 mm
Engine Application
Verify that the engine type and crankshaft configuration match the specified part number before mounting.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,79
-
Width in mm18,55
-
Make (Engine)Alfa Romeo
-
Rod Journal Diameter in mm55,99
56,01 -
Max. connecting rod bore in mm59,64
-
Min. connecting rod bore in mm59,62