ACL Race Series Connecting Rod Bushes - Nissan CA18DET, CA16, and CA18 - STD - 4B1630H-STD
ACL Race Series 4B1630H-STD trimetal connecting rod bushes are designed for Nissan CA18DET, CA16, and CA18 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine assembly. Part number 4B1630H-STD corresponds to the standard size (STD).
ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1630H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: CA18DET, CA16, and CA18
- Manufacturers: Nissan
- Rod journal diameter (nominal dimension): 44.961 to 44.974 mm
- Connecting rod top end bore: 48 to 48.013 mm
- Maximum thickness at the top: 1.505 mm
- Maximum width: 18.6 mm
Engine models compatible with ACL 4B1630H-STD bearings
The engine models listed for this set include: CA18DET | CA16 | CA18 | CA20 | CD17.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for racing and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,5
-
Width in mm18,60
-
Engine codeCA18DET - 1.8L 16V
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm44,96
44,97 -
Max. connecting rod bore in mm48,01
-
Min. connecting rod bore in mm48,00