ACL Race Series Connecting Rod Bushes - BMW and MINI N18B16 - 0.025 mm - 4B7787H-.025
ACL Race Series 4B7787H-.025 connecting rod bushes with a trimetal structure are designed for BMW and MINI N18B16 engines. They guide the connecting rod top ends over the crankshaft journals and operate using the oil film that separates the moving surfaces. Part number 4B7787H-.025 corresponds to a thickness of 0.025 mm.
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
This 0.025 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B7787H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: N18B16
- Manufacturers: BMW | MINI
Engine models compatible with ACL 4B7787H-.025 bearings
The engine models listed for this set include: N13B16A | N12B16 | N14B16 | N16B16 | N18B16.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,5
-
Width in mm19,70
-
Engine codeEP6 - 1.6L 16V
EP6CDTX - 1.6L 16V
N13B16 - 1.6L 16V
N14B16 - 1.6L 16V
N18B16 - 1.6L 16V -
Make (Engine)BMW
Mini -
Rod Journal Diameter in mm44,95
44,97 -
Max. connecting rod bore in mm48,00
-
Min. connecting rod bore in mm47,97