ACL Race Series Connecting Rod Bushes - Nissan TD25 and TD27 - 0.25 mm - 4B2966H-.25
ACL Race Series 4B2966H-.25 connecting rod bushes with a trimetal construction are designed for Nissan TD25 and TD27 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B2966H-.25 corresponds to a thickness of 0.25 mm.
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B2966H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: TD25 and TD27
- Manufacturers: Nissan
Engine types compatible with ACL 4B2966H-.25 bearings
The engine models listed for this set include: TD25 | TD27.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding resurfacing has been performed.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,64
-
Width in mm26,10
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm56,66
56,68 -
Max. connecting rod bore in mm60,00
-
Min. connecting rod bore in mm59,99