ACL Race Series Connecting Rod Bushes - Nissan SR20DE - STD - 4B2960HX-STD

ACL
Reference: ACL-4B2960HX-STD
Supplier Ref.: 4B2960HX-STD

Price: CHF 58.00 Tax included
Supplier stock Shipped between 2026-11-27 and 2026-12-02 from our warehouse
Unavailable in store (Promasens)
Earn 58 loyalty points

The ACL Race Series 4B2960HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Nissan SR20DE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B2960HX-STD corresponds to the standard size (STD).

Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.


Technical Specifications

  • Type: Connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer Part Number: 4B2960HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: SR20DE
  • Manufacturers: Nissan
  • Rod journal diameter (nominal dimension): 47.956 to 47.974 mm
  • Connecting rod top end bore: 51 to 51.013 mm
  • Maximum thickness at the top: 1.49 mm
  • Maximum width: 17.1 mm

Engine models compatible with ACL 4B2960HX-STD bearings

The engine models listed for this set include: SR20DE | SR20DET.

Mounting Recommendations

Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.

ACL Race Series develops engine bearings for racing and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,49
  • Width in mm
    17,10
  • Engine code
    SR20DE - 2.0L 16V
    SR20DET - 2.0L 16V
  • Make (Engine)
    Nissan
  • Rod Journal Diameter in mm
    47,96
    47,97
  • Max. connecting rod bore in mm
    51,01
  • Min. connecting rod bore in mm
    51,00

16 other products in the same category: