ACL Race Series Connecting Rod Bushes - Porsche 930.02, 930.12, and 930.50 - 0.025 mm - 6B2455H-.025
ACL Race Series 6B2455H-.025 trimetal connecting rod bushes are designed for Porsche 930.02, 930.12, and 930.50 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 6B2455H-.025 corresponds to a thickness of 0.025 mm.
ACL Race Series trimetal technology consists of a steel core and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.025 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2455H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: 930.02, 930.12, and 930.50
- Manufacturers: Porsche
Engine models compatible with ACL 6B2455H-.025 bearings
The engine models listed for this set include: 930.02 | 930.12 | 930.50 | 930.51 | 930.52.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical strength and precise control of operating clearances.
-
Thickness in mm2,00
-
Width in mm19,80
-
Engine code911 - 2.4L 12V
911 - 2.7L 12V
930 - 3.0L 12V
930 Turbo - 3.0L 12V -
Make (Engine)Porsche
-
Rod Journal Diameter in mm51,95
51,97 -
Max. connecting rod bore in mm56,02
-
Min. connecting rod bore in mm56,00