ACL Race Series Connecting Rod Bushes - Suzuki G13A, G13B, and G13BA - 0.25 mm - 4B8336H-.25
ACL Race Series 4B8336H-.25 trimetal connecting rod bushes are designed for Suzuki G13A, G13B, and G13BA engines. They guide the connecting rod top ends over the crankshaft journals and operate using an oil film that separates the moving surfaces. Part number 4B8336H-.25 corresponds to a thickness of 0.25 mm.
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction ply, a nickel barrier, and a lead-tin-copper surface trim. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankpins. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8336H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: G13A, G13B, and G13BA
- Manufacturers: Suzuki
Engine models compatible with ACL 4B8336H-.25 bearings
The engine models listed for this set include: G13A | G13B | G13BA | G13BB.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,62
-
Width in mm18,13
-
Engine codeG13B - 1.3L 16V
-
Make (Engine)Suzuki
-
Rod Journal Diameter in mm41,73
41,75 -
Max. connecting rod bore in mm45,02
-
Min. connecting rod bore in mm45,00