ACL Race Series Connecting Rod Bushes - Ford and Mazda L3 - 0.025 mm - 4B8170H-.025
ACL Race Series 4B8170H-.025 trimetal connecting rod bushes are designed for Ford and Mazda L3 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B8170H-.025 corresponds to a thickness of 0.025 mm.
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.025 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8170H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: L3
- Manufacturers: Ford | Mazda
Engine types compatible with ACL 4B8170H-.025 bearings
The engine types listed for this set include: L3.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,5
-
Width in mm17,00
-
Engine codeDuratec - 2.3L 16V
MZR - 2.3L 16V -
Make (Engine)Ford
Mazda -
Rod Journal Diameter in mm49,96
49,98 -
Max. connecting rod bore in mm53,05
-
Min. connecting rod bore in mm53,03