ACL Race Series Connecting Rod Bushes - Ford and Mazda L3-VDT and L3 - STD - 4B8171H-STD
ACL Race Series 4B8171H-STD connecting rod bushes with a trimetal construction are designed for Ford and Mazda L3-VDT and L3 engines. They guide the connecting rod top ends over the crankpins and operate using an oil film that separates the moving surfaces. Part number 4B8171H-STD corresponds to the standard (STD) size.
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining optimal conditions for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8171H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: L3-VDT and L3
- Manufacturers: Ford | Mazda
- Rod journal diameter (nominal dimension): 51.98 to 52 mm
- Connecting rod top end bore: 55.021 to 55.034 mm
- Maximum thickness at the top: 1.5 mm
- Maximum width: 17 mm
Engine types compatible with ACL 4B8171H-STD bearings
The engine types listed for this set include: EcoBoost | L3-VDT | L3.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for racing and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm17,00
-
Engine codeEcoBoost - 2.0L 16V
EcoBoost - 2.3L 16V -
Make (Engine)Ford
Mazda -
Rod Journal Diameter in mm51,98
52,00 -
Max. connecting rod bore in mm55,03
-
Min. connecting rod bore in mm55,02