ACL Connecting Rod Bushes - 0.30 mm - 4B2250-030
ACL 4B2250-030 connecting rod bushes correspond to the manufacturer’s part number specified for the engine in question. Their function is to help guide rotating surfaces and maintain the oil film in the lower engine.
This part number is part of the ACL bearing lineup, but its current designation does not allow for the specific construction of the ACL Race Series versions to be determined without verification. It must be selected based on the dimensions of the crankshaft and the corresponding housings.
The 0.30 mm dimension must be compared to the actual machining tolerance of the crankshaft and the clearance value measured during assembly.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Manufacturer Part Number: 4B2250-030
- Dimension: 0.30 mm
Mounting Recommendations
Mounting recommendation: Select the dimension based on the crankshaft measurements; then check the assembled bore with the cap tightened to the specified value. Bearing oiling depends on the resulting clearance. A replacement dimension should only be mounted if the corresponding machining has been performed.
-
Thickness in mm1,97
-
Width in mm20,06
-
Rod Journal Diameter in mm47,35
47,36 -
Max. connecting rod bore in mm51,35
-
Min. connecting rod bore in mm51,33