ACL Race Series Connecting Rod Bushes - Ford DURATEC - STD - 4B7267HX-STD
ACL Race Series 4B7267HX-STD connecting rod bushes with a trimetal construction are designed for Ford DURATEC engines. They guide the connecting rod top ends on the crankshaft journals and operate using the oil film that separates the moving surfaces. Part number 4B7267HX-STD corresponds to the standard (STD) size.
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The suffix HX identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B7267HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: DURATEC
- Manufacturers: Ford
- Rod journal diameter (nominal dimension): 43.985 to 44 mm
- Connecting rod top end bore: 47.035 to 47.045 mm
- Maximum thickness at the top: 1.503 mm
- Maximum width: 15.3 mm
Engine types compatible with ACL 4B7267HX-STD bearings
The engine models listed for this set include: EcoBoost | DURATEC.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm15,30
-
Engine codeEcoBoost - 1.6L 16V
-
Make (Engine)Ford
-
Rod Journal Diameter in mm43,99
44,00 -
Max. connecting rod bore in mm47,05
-
Min. connecting rod bore in mm47,04