ACL Race Series Connecting Rod Bushes - Honda and Acura B18C1, B18C5, and B18C2 - STD - 4B1925HX-STD

ACL
Reference: ACL-4B1925HX-STD
Supplier Ref.: 4B1925HX-STD

Price: CHF 51.50 Tax included
Available to order Within 20 days on average.
Unavailable in store (Promasens)
Earn 51 loyalty points

ACL Race Series 4B1925HX-STD connecting rod bushes with a trimetal construction are designed for Honda and Acura B18C1, B18C5, and B18C2 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B1925HX-STD corresponds to the standard size (STD).

Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats deform during operation.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.


Technical Specifications

  • Type: Connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer Part Number: 4B1925HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: B18C1, B18C5, and B18C2
  • Manufacturers: Honda | Acura
  • Rod journal diameter (nominal dimension): 44.976 to 45 mm
  • Connecting rod top end bore: 48 to 48.024 mm
  • Maximum thickness at the top: 1.489 mm
  • Maximum width: 17.5 mm

Engine models compatible with ACL 4B1925HX-STD bearings

The engine models listed for this set include: B18C1 | B18C5 | B18C2 | B18C7.

Mounting Recommendations

Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.

  • Thickness in mm
    1,49
  • Width in mm
    17,50
  • Engine code
    B18C1 - 1.8L 16V
    B18C5 - 1.8L 16V
  • Make (Engine)
    Acura
    Honda
  • Rod Journal Diameter in mm
    44,98
    45,00
  • Max. connecting rod bore in mm
    48,02
  • Min. connecting rod bore in mm
    48,00

16 other products in the same category: