ACL Connecting Rod Bushes - MINI 4-Cyl - 0.30 mm - 4B2201-030
ACL 4B2201-030 connecting rod bushes correspond to the manufacturer’s part number specified for MINI (4CYL). Their function is to help guide rotating surfaces and maintain the oil film in the lower engine.
This part number is part of the ACL bearing lineup, but its current identification does not allow it to be definitively classified as an ACL Race Series version without verification. It must be selected based on the dimensions of the crankshaft and the corresponding bearings.
The 0.30 mm dimension must be compared to the actual machining tolerance of the crankshaft and the clearance value measured during assembly.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Manufacturer Part Number: 4B2201-030
- Dimension: 0.30 mm
- Main engines: 4-cylinder
- Manufacturers: MINI
Engine configurations compatible with ACL 4B2201-030 bearings
The engine types listed for this set include: 4CYL.
Mounting Recommendations
Mounting recommendation: Select the size based on the crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified value. Oiling of the bearing depends on the resulting clearance. A repair size should only be installed if the corresponding machining has been performed.
-
Thickness in mm1,98
-
Width in mm22,35
-
Make (Engine)Mini
-
Rod Journal Diameter in mm40,99
41,00 -
Max. connecting rod bore in mm44,98
-
Min. connecting rod bore in mm44,97