ACL Race Series Connecting Rod Bushes - Honda and Acura F20C and F22C - STD - 4B1912H-STD
ACL Race Series 4B1912H-STD connecting rod bushes with a trimetal construction are designed for Honda and Acura F20C and F22C engines. They guide the connecting rod top ends over the crankpins and operate using an oil film that separates the moving surfaces. Part number 4B1912H-STD corresponds to the standard (STD) size.
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B1912H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: F20C and F22C
- Manufacturers: Honda | Acura
- Rod journal diameter (nominal dimension): 47.98 to 48 mm
- Connecting rod top end bore: 51.004 to 51.024 mm
- Maximum thickness at the top: 1.496 mm
- Maximum width: 19.4 mm
Engine models compatible with ACL 4B1912H-STD bearings
The engine models listed for this set include: H22 | F20C | F22C | F20C/22C with K24 Crank | H22A | H22Z.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and performance tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm19,40
-
Engine codeF20C - 2.0L 16V
F20C/22C with K24 Crank - 2.4L 16V
F22C - 2.2L 16V
H22 - 2.2L 16V -
Make (Engine)Acura
Honda -
Rod Journal Diameter in mm47,98
48,00 -
Max. connecting rod bore in mm51,02
-
Min. connecting rod bore in mm51,00