ACL Race Series Connecting Rod Bushes - Subaru EZ30D - STD - 6B8275H-STD
ACL Race Series 6B8275H-STD connecting rod bushes with a trimetal construction are designed for Subaru EZ30D engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 6B8275H-STD corresponds to the standard size (STD).
ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B8275H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: EZ30D
- Manufacturers: Subaru
- Rod journal diameter (nominal dimension): 51.984 to 52 mm
- Connecting rod top end bore: 55 to 55.016 mm
- Maximum thickness at the top: 1.5 mm
- Maximum width: 15.45 mm
Engine models compatible with ACL 6B8275H-STD bearings
The engine models listed for this set include: EZ30D.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm15,45
-
Make (Engine)Subaru
-
Rod Journal Diameter in mm51,98
52,00 -
Max. connecting rod bore in mm55,02
-
Min. connecting rod bore in mm55,00