ACL Race Series Connecting Rod Bushes - Toyota 2ZZ and 2ZZ-GE - STD - 4B1856HX-STD

ACL
Reference: ACL-4B1856HX-STD
Supplier Ref.: 4B1856HX-STD

Price: CHF 102.00 Tax included
Supplier stock Shipped between 2026-11-27 and 2026-12-02 from our warehouse
Unavailable in store (Promasens)
Earn 102 loyalty points

ACL Race Series 4B1856HX-STD connecting rod bushes with a trimetal construction are designed for Toyota 2ZZ and 2ZZ-GE engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 4B1856HX-STD corresponds to the standard (STD) size.

The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining optimal conditions for oil film formation.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer Part Number: 4B1856HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: 2ZZ and 2ZZ-GE
  • Manufacturers: Toyota
  • Rod journal diameter (nominal dimension): 44.992 to 45 mm
  • Connecting rod top end bore: 48 to 48.024 mm
  • Maximum thickness at the top: 1.479 mm
  • Maximum width: 16 mm

Engine models compatible with ACL 4B1856HX-STD bearings

The engine models listed for this set include: 2ZZ | 2ZZ-GE.

Mounting Recommendations

Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.

ACL Race Series develops engine bearings for competition and performance tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.

  • Thickness in mm
    1,48
  • Width in mm
    16,00
  • Engine code
    2ZZ - 1.8L 16V
  • Make (Engine)
    Toyota
  • Rod Journal Diameter in mm
    44,99
    45,00
  • Max. connecting rod bore in mm
    48,02
  • Min. connecting rod bore in mm
    48,00

16 other products in the same category: