ACL Race Series Connecting Rod Bushes - Chevrolet LS1, LS6, and LS2 - STD - 8B663H-STD
ACL Race Series 8B663H-STD connecting rod bushes with a trimetal construction are designed for Chevrolet LS1, LS6, and LS2 engines. They guide the connecting rod top ends over the crankshaft journals and operate using the oil film that separates the moving surfaces. Part number 8B663H-STD corresponds to the standard (STD) size.
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface trim. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the prescribed torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 8B663H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: LS1, LS6, and LS2
- Manufacturers: Chevrolet
- Rod journal diameter (nominal dimension): 53.315 to 53.34 mm
- Connecting rod top end bore: 56.507 to 56.52 mm
- Maximum thickness at the top: 1.572 mm
- Maximum width: 21.25 mm
Engine models compatible with ACL 8B663H-STD bearings
The engine models listed for this set include: LS1 | LS6 | LS2 | LS3.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,57
-
Width in mm21,25
-
Make (Engine)Chevrolet
-
Rod Journal Diameter in mm53,32
53,34 -
Max. connecting rod bore in mm56,52
-
Min. connecting rod bore in mm56,51