The Powersprint 2-hole flange exhaust gasket ensures a tight seal between two connecting flanges in an exhaust line. Resistant to high temperatures, it is suitable for compatible stainless steel flanges and connectors.
Its two oblong mounting holes allow it to be mounted on the corresponding assemblies. Available for several connection diameters, ranging from 32 to 89 mm, it must be selected based on the sizes of the flanges to be joined.
Before mounting, check the passage diameter and the layout of the mountings. The contact patches must be clean and in good condition to ensure a tight seal at the joint.
Technical Specifications
- Brand: Powersprint
- Type: Exhaust Gasket
- Mounting: 2 oblong holes
- Resistance: high temperatures
- Application: Compatible exhaust flanges and fittings
- Connection diameters: 32 to 40 mm, 45 mm, 50 to 57 mm, 60 to 70 mm, 76 mm, and 89 mm
Part Numbers and Mounting Sizes
The hole sizes and distances listed below are taken from the drawings of the flanges corresponding to each variant.
- PS-900809 — Connection diameter: 32 to 40 mm
- Oval hole sizes: 14 × 10.5 mm.
- Distance between the inner edges of the two holes: 67 mm.
- PS-900909 — Connection diameter: 45 mm
- Sizes of the slotted holes: 18 × 13 mm.
- Distance between the inner edges of the two holes: 77 mm.
- PS-901009 — Connection diameter: 50 to 57 mm
- Sizes of the slotted holes: 18 × 13 mm.
- Distance between the inner edges of the two holes: 77 mm.
- PS-901209 — Connection diameter: 60 to 70 mm
- Sizes of the slotted holes: 18.5 × 13 mm.
- Distance between the inner edges of the two holes: 83.5 mm.
- PS-901309 — Connection diameter: 76 mm
- Sizes of the slotted holes: 22 × 13 mm.
- Distance between the inner edges of the two holes: 96 mm.
- PS-901409 — Connection diameter: 89 mm
- Sizes of the slotted holes: 24 × 13 mm.
- Distance between the inner edges of the two holes: 114 mm.
Reading the sizes: The sizes of the slotted holes are listed as length × width. The distance between their inner edges does not correspond to a mounting center distance.
Products intended for vehicle modification for competition purposes may render their use prohibited on public roads, insofar as they significantly alter the vehicle's characteristics as specified in the type-approval certificate issued by the relevant authorities (noise level, pollutant emissions, maximum speed, tire dimensions, etc.).
