ACL Race Series Connecting Rod Bushes - Volkswagen and Audi EA888 - STD - 4B5562HX-STD
The ACL Race Series 4B5562HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Volkswagen and Audi EA888 engines. They guide the connecting rod top ends on the crankshaft journals and operate using the oil film that separates the moving surfaces. Part number 4B5562HX-STD corresponds to the standard (STD) size.
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction ply, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B5562HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: EA888
- Manufacturers: Volkswagen | Audi
- Rod journal diameter (nominal dimension): 47.758 to 47.778 mm
- Connecting rod top end bore: 50.6 to 50.619 mm
- Maximum thickness at the top: 1.392 mm
- Maximum width: 17.4 mm
Engine models compatible with ACL 4B5562HX-STD bearings
This part number applies specifically to the following engine models in the described family: EA888 | EA888 GEN3 | BYT | BZB | CABA | CABB | CGYA | CADA | CAEA | CAEB | CAED | CAWA | CAWB | CBFA | CCTA | CCTB | CCZA | CCZB | CCZC | CCZD. The list of engine codes and applications must be verified against the exact mounting configuration before placing an order.
Mounting Recommendations
Mounting Recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,39
-
Width in mm17,40
-
Engine codeEA855 - 2.5L 20V
EA855 EVO - 2.5L 20V
EA888 - 1.8L 16V
EA888 - 2.0L 16V
EA888 GEN3 - 2.0L 16V -
Make (Engine)Audi
Volkswagen -
Rod Journal Diameter in mm47,76
47,78 -
Max. connecting rod bore in mm50,62
-
Min. connecting rod bore in mm50,60