ACL Race Series Connecting Rod Bushes - Nissan KA24DE - STD - 4B2746H-STD
ACL Race Series 4B2746H-STD connecting rod bushes with a trimetal construction are designed for Nissan KA24DE engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 4B2746H-STD corresponds to the standard (STD) size.
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction ply, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining optimal conditions for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B2746H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: KA24DE
- Manufacturers: Nissan
- Rod journal diameter (nominal dimension): 49.961 to 49.974 mm
- Connecting rod top end bore: 53 to 53.013 mm
- Maximum thickness at the top: 1.505 mm
- Maximum width: 20 mm
Engine models compatible with ACL 4B2746H-STD bearings
The engine models listed for this set include: KA24DE.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,5
-
Width in mm20,00
-
Engine codeKA24DE - 2.4L 16V
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm49,96
49,97 -
Max. connecting rod bore in mm53,01
-
Min. connecting rod bore in mm53,00