ACL Race Series Connecting Rod Bushes - Subaru EJ15 and EJ16 - 0.50 mm - 4B8296H-.50
The ACL Race Series 4B8296H-.50 trimetal connecting rod bushes are designed for Subaru EJ15 and EJ16 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B8296H-.50 corresponds to a thickness of 0.50 mm.
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
This 0.50 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s tuning level.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8296H-.50
- Thickness: 0.50 mm
- Version: H
- Main engines: EJ15 and EJ16
- Manufacturers: Subaru
Engine models compatible with ACL 4B8296H-.50 bearings
The engine models listed for this set include: EJ15 | EJ16 | EJ18 | EJ20 | EJ22 | EJ25 | EJ20T | EJ20TT | EJ22T | EJ25T.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical strength and precise control of operating clearances.
-
Thickness in mm1,75
-
Width in mm16,50
-
Engine codeEJ20 - 2.0L 16V
EJ22 - 2.2L 16V
EJ25 DOHC - 2.5L 16V
EJ25 SOHC - 2.5L 16V
EJ205/207 - 2.0L 16V
EJ255 - 2.5L 16V
EJ257 - 2.5L 16V -
Make (Engine)Subaru
-
Rod Journal Diameter in mm51,48
51,50 -
Max. connecting rod bore in mm55,02
-
Min. connecting rod bore in mm55,00